SMART 3BASS TARAMPS

SMART 3BASS TARAMPS

Here are the technical specifications of the Taramps SMART 3 BASS amplifier:

Operation Class:

• Class D

Number of Channels:

• 1 (Monobloc)

Maximum Power (RMS):

• The SMART 3 BASS is a multi-impedance amplifier. This means it is designed to deliver the same power over a range of impedances.
  • @ 14.4 VDC: 3000 Watts RMS for any output impedance between 0.5 Ohm and 2 Ohms.
  • For reference, at 14.4 VDC and 4 Ohms , it is usually specified at 1700 Watts RMS.
  • (Some sources may also mention power @ 12.6VDC, but 14.4VDC is the most common for Taramps for maximum power).

Input Sensitivity:

• 0.2V to 4V (variable)

Signal-to-Noise Ratio:

• 90dB

Frequency Response:

• 8Hz to 200Hz (-3dB) (Designed specifically for low frequencies)

Crossover Filters:

• High-Pass Filter (HPF): Variable, 8Hz to 30Hz (-12dB/8ª)
• Low-pass filter (LPF): Variable, 60Hz to 200Hz (-12dB/8ª)

Bass Boost:

• Frequency: 35Hz to 60Hz
• Boost: 0 to +10dB

Efficiency :

• 75%

Input Impedance:

• 10K Ohms

Output Impedance:

• 0.5 Ohm ~ 2 Ohms (The "Multi-impedance" feature of the SMART series)

Protection System:

• Short circuit at the output
• Protection against low/high supply voltages
• Thermal protection

Supply Voltage:

• Minimum: 9 VDC
• Maximum: 17 VDC

Consumption :

• At rest: 1.10A
• Maximum (musical): 190 Amps
• Maximum (sinusoidal signal): 278 Amperes

Dimensions (W x H x D):

• 238 x 71 x 240 mm (approximately 9.37" x 2.80" x 9.45")

Weight :

• Approximately 3 kg (6.60 lb)

Recommended cabling:

• Positive/Negative Power: Min. 4 AWG (21 mm²) / Max. 1/0 AWG (50 mm²)
• Output Cables (Speaker): 9 AWG (6 mm²)
• Remote Cable: 18 AWG (0.75 mm²)
• Recommended fuse or circuit breaker: 200A